Glass Fixing Detail – Sturdy, Functional Balustrades
Know the best way of fixing glass to concrete? Read through our glass fixing details for a safe new balustrade
- Powder coated Aluminium Channel
- Corse thread Coach Screw on timber
- Chemical fastener (Chemset) on Concrete
- Non Shrink Grout Glass Fixing Method
- Formed Rebate in Slab by others
- Conducive to new pool installation.
- Non Shrink Grout Glass fixing method
- Installation – New Concrete Slab
- Single pin fix system – M12 Stainless Steel
- Corse thread Lag Screw on Timber
- Chemical fastener (Chemset) on Concrete
- Optional Core Drill and Grout on Concrete
- No Visible base fixings – Bolt inside post
- Installation – Timber, Concrete or Steel
Please Note: Our balustrading & pool fencing is only as strong as the structure it is being fixed to therefore good planning on behalf of your builder or building designer are required to ensure adequate support is allowed for during construction. If unsure of fixing requirements please contact one of our friendly sales staff for advice on glass fixing details and fixing glass to concrete.
Typical fixing requirements are a recommendation only and may need to vary depending on structural suitability. Nu-Lite reserves the right to refuse installation if not structurally adequate.
We recommend early involvement in the planning and development of your Balustrading or Pool Fence to ensure complete satisfaction.
Contact us with any enquiries on (03) 9706 6766 about our glass fixing details or if you’re going to be fixing glass to concrete.