|
Aluminium Extrusions
Extrusions are manufactured locally using both general purpose alloy 6063-T5 and Structural alloy 6061-T6 where applicable.
Aluminium has natural corrosion resistance in it raw form but is generally coated for aesthetics. To provide a 7 Year
guarantee all extrusions used in the manufacture of balustrading or pool fencing are pre cut and punched prior to coating so
as to alleviate any form of corrosion or paint adhesion failure.
Aluminium Castings
Castings are also manufactured locally in a heat treatable alloy AC601-T5. Due to the characteristics of cast alloy we are
unable to anodize products and only provide Powder Coat finishing.
Powder Coating
There is a large range of colours available in the powder coat range some of which simulate an anodized finish for those
wanting to match colours. Our powder coating conforms to Australian Standard AS3175 “Metal Finishing - Thermoset powder
coatings for architectural applications” furthering our commitment to quality.
Stainless Steel
Marine Grade 316 stainless is used for all external applications. Although using the highest quality stainless product,
all stainless over time will tarnish and require some form of cleaning or maintenance. This surface rust in no way affect
the structural adequacy of the product used and tends be accelerated in certain conditions such as coastal regions.
Hardware
All hardware and components are made from either aluminium or stainless steel to ensure a rust free product.
Glass
Glass is supplied and installed to Australian Standard AS1288 (2006). Glass thickness from 6mm to 19mm are available to
suite any application. Various tints are also available including obscure glass for privacy. Our glass is locally produced
and Toughened for strength and safety.
|
